Estudo de compatibilidade e estabilidade térmica do ácido retinóico e hidroquinona por termogravimetria

Retinoic acid (RA) and hydroquinone (HQ) assets are widely used in pharmaceutical and cosmetic formulations, for having depigmenting properties and are largely produced in drugstores. To assist in the development of formulations containing the active RA and HQ National Forms of Brazilian Pharmacopoeia (2005 and 2012 ) proposes formulations with different excipients such as cetyl alcohol (AC), cetostearyl alcohol (ACT), methylparaben (MTP), propyl paraben ( PPB), glycerin (GLY), dipropylene glycol (DPG), imidazolidinil urea ( IMD ), cyclomethicone (CCM ), butylated hydroxytoluene (BHT), octyl stearate (ETO), EDTA, decil oleate (ODC) and hydroxipropymethyl celullose (HPMC). One of the difficulties found in most cosmetic formulations is the large number of incompatibilities between the components of the formulations, so the aim this study was to evaluate thermal stability and interactions between these active pharmaceutical ingredients and excipients. The depigmenting agents were analyzed by DSC and TG and excipients were analyzed by TG. The dynamic thermogravimetric curves were obtained on a SHIMADZU thermobalance, model DTG-60, using an alumina crucible, at the heating rate of 10ºC min-1, in the temperature range of 25-900 ºC, under an atmosphere of nitrogen at 50 mL min-1. The DSC curves were obtained using Shimadzu calorimeter, model DSC-60, using aluminum crucible, at the heating rate of 10ºC min-1, in the temperature range of 25-400ºC. The thermogravimetric and calorimetric curves were analyzed using TASYS software SHIMADZU. In this study no were found interactions between AR and the following excipients: MTP, PPB, IMD, ODC, EDTA, CCM, ETO, HPMC. However, were found interactions with the following excipients: AC, ACT, BHT, GLI and DPG. For HQ were found interactions with IMD and DPG. Interactions remained even changing proportions of the mixtures and the ternary. Thus, the studies conducted with excipients of National Formulary from 2005 and 2012 showed that these new excipients do not interact by thermogravimetry with the active pharmaceutical ingredients of this study

A Servidão Administrativa e o Estado Regulador: Compatibilidade com o Princípio Constitucional da Legalidade e a Limitação ao Direito Real de Propriedade

The economic changes occurred in the 90s, with the restructuring and privatization of various sectors of the economy have led to a redefinition of the State role, assuming a position of regulator and supervisor of public services in place to direct its role as straight intervenor. It is through the regulatory agencies, autarchies with special legal personality under public law, that the Regulator State will act. In this context, the first objective of this research is to analyze the legality of easements imposed by entities of the Direct Administration and Regulatory Agencies, whose execution is delegated to legal persons of private law, being those public service companies or mixed-economy societies. This examination in question the limits of servitude as a restrictive institute of property rights, observing the principles of function, supremacy of the public interests over the private ones, legality and the separation of powers. Defend the property rights like a fundamental right and your insurance as determining factor of economic development and social justice. Use the procedure in use will be the historiccomparative procedure, in order to demonstrate the legality of the public act as a maximum attempt to preserve the balance between the expansion of public services in various sectors of the economy, and the preservation of property rights, through regulation

A proposta do estado empregador de ultima instância e o experimentalismo democrático: uma reflexão teórica sobre a compatibilidade desses dois programas

This paper aims to make a theoretical reflection on the theoretical compatibility between the program State Employer of Last Resort (ELR) and the Democratic experimentalism (ED). The ED arises in political thought as an alternative to neo-liberal and social democratic programs in order to rescue the discussion about the institutional organization of society and the market economy. About the involuntary unemployment, it proposes tax changes incidents on payroll and proposes work fronts to the most vulnerable or poorly trained. The hypothesis of this paper is that this approach is compatible with the ELR program, the post- Keynesian line. The ELR is presented as transgression of the mainstream of economic thought by proposing that the State acts as guarantor of employment, working as a stabilizing anchor for the economy. On the edge, the ELR proposes eliminate completely involuntary unemployment. The implementation of the ELR, however, requires the construction of institutions that aim to remake the market economy, as well as deepen and energize politics and democracy, goals that are part of the ED program. Thus, the ED would, in theory, an environment conducive to innovative policies guarantors of training and occupation of the individual, essential for their emancipation institutional environment. In Brazil, which has serious infrastructure problems and qualification of manpower, such a program has enormous potential benefit. However when transposed to the Northeast of Brazil through the Plan for the region based on the principles of the ED and the hypothetical coupling to the ELR could not confirm or reject the hypothesis sub-compatibility of these two theoretical frameworks. The findings point to a partial convergence between these two programs

Trissoralen um medicamento de baixa dosagem: estudos termoanalíticos da compatibilidade do fármaco-excipientes e determinação de parâmetros de qualidade para cápsulas magistrais

The trioxsalen (Tri) is a low-dose drug used in the treatment of psoriasis and other skin diseases. The aim of the study was applying the thermal analysis and complementary techniques for characterization, evaluation of the trioxsalen stability and components of manipulated pharmaceutical formulations. The thermal behavior of the Tri by TG/DTG-DTA in dynamic atmosphere of synthetic air and nitrogen showed the same profile with a melting peak followed by a volatilization-related event. From the curves TG / DTG is observed a single stage of mass loss. By heating the drug in the stove at temperatures of 80, 240 and 260 °C, it had no change in chemical structure through the techniques of XRD, HPLC, MIR, OM and SEM. From the non-isothermal and isothermal TG kinetic studies was possible to calculate the activation energy and reaction order for the Tri. The drug showed good thermal stability. Studies on drug-excipient compatibility showed interaction of trissoralen with sodium lauryl sulfate 1:1. There was no interaction with aerosol, pregelatinized starch, sodium starch glycolate, cellulose, croscarmellose sodium, magnesium stearate, lactose and mannitol.The characterization of three trioxsalen formulations at concentrations of 2.5, 5, 7.5, 10, 12.5 and 15 mg was performed by DSC, TG / DTG, XRD, NIR and MIR. The PCA classification method based on spectral data from the NIR and MIR of trissoralen formulations allows successful differentiation into three groups. The formulation 3 was the one that best showed analytical profile with the following composition of aerosil excipients, pre-gelatinized starch and cellulose. The activation energy of the volatilization process of the drug was determined in binary mixtures and formulation 3 through fitting and isoconversional methods. The binary mixture with sodium starch glycolate and lactose showed differences in kinetic parameters compared to the drug isolated. The thermoanalytical techniques (DSC and TG / DTG) were shown to be promising methodologies for quantifying trioxsalen obtained by the linearity, selectivity, no use solvents, without sample preparation, speed and practicality.

Avaliação de compatibilidade entre pasta de cimento e fluido de perfuração não-aquoso utilizados em poços petrolíferos

Compatibility testing between a drilling fluid and a cement slurry is one of the steps before an operation of cementing oil wells. This test allows us to evaluate the main effects that contamination of these two fluids may cause the technological properties of a cement paste. The interactions between cement paste and drilling fluid, because its different chemical compositions, may affect the cement hydration reactions, damaging the cementing operation. Thus, we carried out the study of the compatibility of non-aqueous drilling fluid and a cement slurry additives. The preparation procedures of the non-aqueous drilling fluid, the cement paste and completion of compatibility testing were performed as set out by the oil industry standards. In the compatibility test is evaluated rheological properties, thickening time, stability and compressive strength of cement pastes. We also conducted analyzes of scanning electron microscopy and X-ray diffraction of the mixture obtained by the compatibility test to determine the microstructural changes in cement pastes. The compatibility test showed no visual changes in the properties of the cement paste, as phase separation. However, after the addition of nonaqueous drilling fluid to cement slurry there was an increased amount of plastic viscosity, the yield point and gel strength. Among the major causative factors can include: chemical reaction of the components present in the non-aqueous drilling fluid as the primary emulsifier, wetting agent and paraffin oil, with the chemical constituents of the cement. There was a reduction in the compressive strength of the cement paste after mixing with this drilling fluid. Thickening test showed that the oil wetting agent and high salinity of the non-aqueous fluid have accelerating action of the handle of the cement paste time. The stability of the cement paste is impaired to the extent that there is increased contamination of the cement slurry with the nonaqueous fluid. The X-ray diffraction identified the formation of portlandite and calcium silicate in contaminated samples. The scanning electron microscopy confirmed the development of the identified structures in the X-ray diffraction and also found the presence of wells in the cured cement paste. The latter, formed by the emulsion stability of the drilling fluid in the cement paste, corroborate the reduction of mechanical strength. The oil wetting agent component of the non-aqueous drilling fluid, the modified cement hydration processes, mainly affecting the setting time.

Síntese e caracterização de NiO-CGO para anodo e eletrólitos sólidos e base de Céria para SOFC

The direct use of natural gas makes the Solid Oxide Fuel Cell (SOFC) potentially more competitive with the current energy conversions technologies. The Intermediate Temperature SOFC (IT-SOFC) offer several advantages over the High Temperature SOFC (HT-SOFC), which includes better thermal compatibility among components, fast start with lower energy consumption, manufacture and operation cost reduction. The CeO2 based materials are alternatives to the Yttria Stabilized Zirconia (YSZ) to application in SOFC, as they have higher ionic conductivity and less ohmic losses comparing to YSZ, and they can operate at lower temperatures (500-800°C). Ceria has been doped with a variety of cations, although, the Gd3+ has the ionic radius closest to the ideal one to form solid solution. These electrolytes based in ceria require special electrodes with a higher performance and chemical and termomechanical compatibility. In this work compounds of gadolinia-doped ceria, Ce1-xGdxO2-δ (x = 0,1; 0,2 and 0,3), used as electrolytes, were synthesized by polymeric precursors method, Pechini, as well as the composite material NiO - Ce0,9Gd0,1O1,95, used as anode, also attained by oxide mixture method, mixturing the powders of the both phases calcinated already. The materials were characterized by X ray diffraction, dilatometry and scanning electronic microscopy. The refinement of the diffraction data indicated that all the Ce1-xGdxO2-δ powders were crystallized in a unique cubic phase with fluorite structure, and the composite synthesized by Pechini method produced smaller crystallite size in comparison with the same material attained by oxide mixture method. All the produced powders had nanometric characteristics. The composite produced by Pechini method has microstructural characteristics that can increase the triple phase boundaries (TPB) in the anode, improving the cell efficiency, as well as reducing the mass transport mechanism effect that provokes anode degradation

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Estudo da sinterização de eletrólito sólido de céria dopada com gadolínia

Fuel cells are electrochemical devices that convert chemical energy in electrical energy by a reaction directly. The solid oxide fuel cell (SOFC) works in temperature between 900ºC up to 1000ºC, Nowadays the most material for ceramic electrolytes is yttria stabilized zirconium. However, the high operation temperature can produce problems as instability and incompatibility of materials, thermal degradation and high cost of the surround materials. These problems can be reduced with the development of intermediate temperature solid oxide fuel cell (IT-SOFC) that works at temperature range of 600ºC to 800ºC. Ceria doped gadolinium is one of the most promising materials for electrolytes IT-SOFC due high ionic conductivity and good compatibility with electrodes. The inhibition of grain growth has been investigated during the sintering to improve properties of electrolytes. Two-step sintering (TSS) is an interesting technical to inhibit this grain growth and consist at submit the sample at two stages of temperature. The first one stage aims to achieve the critical density in the initiating the sintering process, then the sample is submitted at the second stage where the temperature sufficient to continue the sintering without accelerate grain growth until to reach total densification. The goal of this work is to produce electrolytes of ceria doped gadolinium by two-step sintering. In this context were produced samples from micrometric and nanometric powders by two routes of two-step sintering. The samples were obtained with elevate relative density, higher than 90% using low energy that some works at the same area. The average grain size are at the range 0,37 μm up to 0,51 μm. The overall ionic conductivity is 1,8x10-2 S.cm and the activation energy is 0,76 eV. Results shown that is possible to obtain ceria-doped gadolinium samples by two-step sintering technique using modified routes with characteristics and properties necessary to apply as electrolytes of solid oxide fuel cell

Caracterização térmica (TG/DTG, DTA, DSC, DSC-fotovisual) de Hormônios bioidênticos (estriol estradiol)

Bioidentical hormones are defined as compounds that have exactly the same chemical and molecular structure as hormones that are produced in the human body. It is believed that the use of hormones may be safer and more effective than the non-bioidentical hormones, because binding to receptors in the organism would be similar to the endogenous hormone. Bioidentical estrogens have been used in menopausal women, as an alternative to traditional hormone replacement therapy. Thermal data of these hormones are scarce in literature. Thermal analysis comprises a group of techniques that allows evaluating the physical-chemistry properties of a drug, while the drug is subjected to a controlled temperature programming. The thermal techniques are used in pharmaceutical studies for characterization of drugs, purity determination, polymorphism identification, compatibility and evaluation of stability. This study aims to characterize the bioidentical hormones estradiol and estriol through thermal techniques TG/DTG, DTA, DSC, DSC-photovisual. By the TG curves analysis was possible to calculated kinetic parameters for the samples. The kinetic data showed that there is good correlation in the different models used. For both estradiol and estriol, was found zero order reaction, which enabled the construction of the vapor pressure curves. Data from DTA and DSC curves of melting point and purity are the same of literature, showed relation with DSC-photovisual results. The analysis DTA curves showed the fusion event had the best linearity for both hormones. In the evaluation of possible degradation products, the analysis of the infrared shows no degradation products in the solid state

Avaliação da argila atapulgita para potencial uso como excipiente farmacêutico em formas sólidas

Clays are natural materials that have great potential for use as excipients for solid dosage forms. Palygorskite is a type of clay that has hydrophilic properties as well as a large surface area, which could contribute to the dissolution of drugs. Thus, the present study aims to evaluate the use of palygorskite clay, from Piaui (Northeast region of Brazil), as a pharmaceutical excipient for solid dosage forms, using rifampicin and isoniazid as the model drugs. The former is a poorly soluble drug often associated with isoniazid for tuberculosis treatment. Palygorskite was characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and specific surface area (BET). The rheological and technological properties of palygorskite were determined and compared to those of talc, magnesium stearate and Aersosil 200. Mixtures between drugs and palygorskite were analyzed by differential scanning calorimetry (DSC), thermogravimetric analysis (TG) combined with thermal analysis (DTA) and Fourier Transform Infrared Spectroscopy (FT-IR), where the results were compared with those of the individual compounds. In addition, dissolution studies of solid dispersions and capsules containing the drugs, mixed with either palygorskite or a mixture of talc and magnesium stearate, were performed. The results showed that palygorskite has small particles with a high surface area. Its rheological characteristics were better than those of others commonly used glidants and lubricants. There was no interaction between palygorskite and the drugs (rifampicin and isoniazid). Among the dispersions studied, the mixture with palygorskite (5%) showed the highest drug dissolution when compared to other excipients. The dissolution of the rifampicin capsules containing palygosrkite was faster in higher concentrations. However, these differences were statistically different only in the first minutes of the dissolution experiment. The dissolution profile of isoniazid was also statistically different on the initial part of the experiment. The formulations prepared with isoniazid and palygorskite showed higher drug dissolution, but it was in descending order of concentration. According to these results, the palygorskite clay used in this study has great potential for application as an excipient for solid dosage forms

Contribuições sobre estudos térmicos (TG/DTG, DTA, DSC e DSC-Fotovisual) da rifampicina e seus principais produtos de degradação

Since its synthesis over 48 years rifampicin has been extensively studied. The literature reports the characterization of thermal events for rifampicin in nitrogen atmosphere, however, no characterization in synthetic air atmosphere. This paper aims to contribute to the thermal study of rifampicin through thermal (TG / DTG, DTA, DSC and DSC - FOTOVISUAL ) and non-thermal (HPLC, XRPD , IR - FTIR , PCA) and its main degradation products ( rifampicin quinone , rifampicin N-oxide 3- formylrifamicin). Rifampicin study was characterized as polymorph form II from techniques DSC, IR and XRPD. TG curves for rifampicin in synthetic air atmosphere showed higher thermal stability than those in N2, when analyzed Ti and Ea. There was characterized as overlapping events melting and recrystallization under N2 with weight loss in the TG curve, suggesting concomitant decomposition. Images DSCFotovisual showed no fusion event and showed darkening of the sample during analysis. The DTA curve in synthetic air atmosphere was visually different from DTA and DSC curves under N2, suggesting the absence of recrystallization and melting or presence only decomposition. The IV - FTIR analysis along with PCA analysis and HPLC and thermal data suggest that rifampicin for their fusion is concomitant decomposition of the sample in N2 and fusion events and recrystallization do not occur in synthetic air atmosphere. Decomposition products studied in an air atmosphere showed no melting event and presented simultaneously to the decomposition initiation of heating after process loss of water and / or solvent, varying the Ti initiating events. The Coats - Redfern , Madsudhanan , Van Krevelen and Herwitz - Mertzger kinetic parameters for samples , through the methods of OZAWA , in an atmosphere of synthetic air and / or N2 rifampicin proved more stable than its degradation products . The kinetic data showed good correlation between the different models employed. In this way we contribute to obtaining information that may assist studies of pharmaceutical compatibility and stability of substances

O Trabalho e o labirinto da responsabilidade socioempresarial:a experiência da cidadania empresarial do Banco do Brasil

In the current systemic crisis, economic policy is directed to correct the consequences of the functioning of this metabolism, but within the limits of the capital. From this perspective, decision makers propose trade policies, agricultural and industrial to ensure conditions for economic growth. However, as a dead end, there is failure of the State in giving efficacy to the operation of all segments of the economy, especially given the budget constraint. Public managers are forced to seek external resources, resuming the cycle of political allegiance to the interests of international financial and banking representatives, installed in so-called multilateral. The complex ideological capital comes into play in trying to convince society that the paths taken by governments are inevitable, and that capitalism can be "humanized", even with the realization of the growing inequalities caused by historical irrationalism of the production process of capital . In this sense, emerging concepts that attempt to demonstrate the compatibility of the system to real human needs. This ideological offensive is intended to legitimize the capital. The so-called third sector has a special highlight with the concept of corporate social responsibility. It creates a political environment in which the inevitable mix-up with new illusions offered by and often funding the metabolism of capital in order to perpetuate this system. In this context, political elites, and considerable portions of the academy, embark on "waves of capitalist optimism," while the sociometabolismo capital expands its historical limits, driving forces postponing their collapse, but that cause human suffering and ecological stress. Wars are disseminated to strengthen the deadly war industry and the automobile industry; and devastating the environment of which depends the capital system. In this scenario disassemble, propositions emerge around a "new social pact" in order to minimize the adverse effects of the dynamics of reproduction of capital. The business class is called to exercise its role through the discourse that appeals to social responsibility programs, in order to intervene directly in the "social question". The core of this research is precisely this point. Although there is considerable scholarship on the phenomenon of Social Responsibility and Corporate Citizenship, there is also an evident lack of this approach focused on the banking sector in Brazil. The importance of rentier capital increased ownership of shares in the wealth produced by all of Brazilian society, justifies a sociological research project on Social Responsibility in the domestic financial sector. In this sense, it was decided to perform a dynamic approach to the "Corporate Citizenship" in the banking industry, specifically in the Bank of Brazil. As this is a key institution, is important analyze of the impacts of this strategy fetish of capitalist reproduction, in order to evaluate the social legitimization of rentier capital in Brazil. In this scenario of the abundance of the discourse on social responsibility there exist a progressive impoverishment of professional work in this segment in Brazil. There is a dramatic mismatch between rhetoric and practice because of the trend of deepening vulnerability of the working conditions of the Brazilian bank worker, from the 1990's. In the specific case of the Bank of Brazil, the first initiative of the institution was to conform to the principles of the UNO and the Ethos Institute, aiming to align their domestic policies to this new strategy of domination of capital. The purpose is to place the Bank in the ideological sphere of corporate social responsibility, just as with its partners in the private financial intercapitalist competition. Indeed, in the internal ambit of the Bank of Brazil, there is a policy to adjust its functional segments to the doctrine of Social Corporate Responsibility. The concepts of this doctrine is presented as something inexorable. There are no alternatives. The Bank of Brazil operates in a highly competitive market, the segment featuring the dominance of financial capital accumulation today. For this reason it can not fail to incorporate the technological advances organizational. For employees there is no alternative but to adapt to this new set of ideas proposed by the metabolism of capital

Desvios de finalidade no Direito Constitucional Tributário brasileiro: aspectos estruturais e teleológicos da tributação na Constituição Federal de 1988

This work deals with considerations regarding common types of tax misuse that are present in the 1988 Brazilian Constitution. Thus, the work aims to unveil dogmatic features present in these practices that are considered illegal and are beset with vices such as power misusage. The research also aims to acknowledge the unconstitutionality issues regarding other guidance on behalf of goods that are responsible for the gradual positive approach realized by the 1988 Brazilian Federal Constitution. Thus, the work systematically used methodological procedures that aim to interpret the logical premises present as in the structure proposed by incidence rule matrix as in Ihering´s correction criteria considered as effective in itself. This is done also considering themes such as the Brazilian Public Tax legal matters. The work also performs a teleological debate of the Brazilian National Tax System as well as other related themes. It is understood that power misusage or any regards increase in aliquots. This can be observed in the quantitative criteria present in central aspects regarding taxes that are described in the constitutional regime either regulatory or induced nature, such as §1º, of the normative information present in article number 153 which is considered predominantly as tax raising such as pointed out in the 1988 Brazilian Constitution. On the other hand, it is seen that the type of misguidance with goods is understood as a practice that deviates as well as cuts connection with (rectius, unattaches) tax resources that are gathered and destined to specific constitutional purposes. At the end, the work deals with issues that aim to identify possible causes that lead to the use of norms and patterns that regulate such deviations. The research emphasizes ratio issues that are present in tax inspection proposals and invalidation that aim to restore the logical compatibility of these normative actions included in the Constitutional Tax Legal matters that was put forth by the 1988 Brazilian Federal Constitution

Da jurisdição constitucional: uma análise da concretização dos direitos fundamentais à luz da hermenêutica constitucional

Trabalho sobre a concretização dos direitos fundamentais pela jurisdição constitucional, mostrando a importância da interpretação da Constituição para a obtenção da eficácia de tais direitos. Desenvolve-se a pesquisa a partir da explicação histórica sobre o constitucionalismo moderno, que implantou o Estado Liberal de Direito e as constituições escritas, e no qual encontra a jurisdição constitucional o seu embasamento cultural e a sua justificação histórica. Verifica-se que a origem da jurisdição constitucional assenta-se no controle da constitucionalidade das leis e atos normativos do poder público, fundado no princípio da supremacia da Constituição. Destaca-se o realce dado pela teoria material da Constituição à normatividade dos princípios constitucionais, tecendo considerações em torno da classificação das normas constitucionais em regras e princípios. Remarca o trabalho que o controle da constitucionalidade pode ser formal ou material, apresentando esta última modalidade uma conotação acentuadamente política, já que, por ele, a aferição da compatibilidade da norma infraconstitucional é feita com o conteúdo material da Constituição. A função primacial da jurisdição constitucional é tutelar os direitos fundamentais, especialmente os das minorias sociais. Tal função sobreleva-se até mesmo contra textos legislativos produzidos por maiorias eventuais, pois o princípio da supremacia da Constituição prevalece sobre a regra da maioria vigente nos regimes democráticos. Comprova-se que a concepção substancialista, adotada para definir os contornos funcionais da jurisdição constitucional, propõe uma maior intervenção desta na apreciação dos casos que lhe são submetidos. Salienta-se que, no Estado Democrático de Direito, derivado da aglutinação do Estado Liberal com o Estado Social e acrescida de um elemento novo voltado à transformação da realidade social, a jurisdição constitucional passa a levar em conta, com mais atenção e destaque, os princípios constitucionais e a sincronia do ordenamento constitucional com a sociedade por ele ordenada. Realça também o estudo que a atuação da jurisdição constitucional, segundo a ideologia democrática defendida pelo Estado Democrático de Direito, tem logrado obter uma sociedade mais justa, e que a comprovação histórica é francamente favorável ao seu ativismo judicial. Os direitos fundamentais dificilmente se dissociam da democracia, que lhes garante a eficácia pela limitação e visibilidade do exercício do poder, traços políticos que constituem a nota típica dos regimes democráticos. Mesmo que os direitos fundamentais tenham tido um caráter pré-estatal como preconizado pelo jusnaturalismo, são eles normas, e não valores, pois tão logo sejam positivados pela Constituição eles se tornam direitos vigentes. Assevera a pesquisa que os métodos concretistas de interpretação constitucional mostram-se mais adequados à obtenção da eficácia da Constituição, pela importância que os elementos objetivos, relacionados com o contexto material da norma, assumem no seu processo de aplicação e interpretação. Conclui-se ser essencial que os operadores e estudiosos do Direito se conscientizem de que a interpretação constitucional deve assumir uma feição principiológica e concretista, de modo a ser obtida a máxima eficácia possível das normas constitucionais, especialmente as de direitos fundamentais, acentuando-se mais a necessidade de um Tribunal Constitucional, cuja criação no Brasil constitui ainda tema polêmico entre os doutrinadores

Fiscalização difusa da constitucionalidade e o incidente de argüição de inconstitucionalidade

The present work consists of studying to diffuse control of constitutionality in Brazil, with emphasis in a procedural alternative to the evolution of that model: the incident to challenge of unconstitutionality. Starting from the discussion about the new role of constitutional jurisdiction in peripheral countries and in the globalized society, without forgetting to face inevitable doubts about its legitimacy before other powers of the State, the Brazilian control of constitutionality is revealed, under a diffuse, non-dichotomical view, through a number of inconsistencies and misunderstandings, that compromise social peace, the credibility of democratic institutions and the supremacy of juridical security. In order to achieve the goal, the study in course discussed the main difficulties of the Brazilian mixed model of constitutionality control, as well as, directing its view to the incident of challenge of unconstitutionality, which the most adequate forms to assure its appropriateness, legitimacy, processing and decisory effects are. Is was essential, in this point of view, to establish the difference between the incident of challenge of unconstitutionality conceived in article of the Brazilian Federal Constitution and the incident of challenge of unconstitutionality such as it is known in the European models. The insertion of the incident of challenge of unconstitutionality based on European models in the Brazilian control system, without jeopardizing the North-American essence the Brazilian constitutional history presents since 1981, is the hypothesis that is presented as an improvement of constitutional protection